← Mechanical blog
Concept guide14 October 2026 · 3 min read

Bernoulli's Equation and the Venturimeter: A Fully Worked Discharge Numerical

MechCivilMECE

A venturimeter measures the flow of liquid in a pipe using nothing but a pressure difference. The whole idea is one application of Bernoulli's equation, and the numerical is mostly careful unit handling.

Bernoulli's equation, in plain words

For steady, incompressible, frictionless flow along a streamline, the total energy per unit weight is constant:

p/ρg + v²/2g + z = constant

The three terms are pressure head, velocity head and elevation head. If the fluid speeds up, something else must drop, and in a horizontal pipe that "something" is pressure.

The venturimeter idea

A venturimeter is a pipe that narrows smoothly to a throat and then widens again.

  • Section 1 is the wide inlet (area A₁, pressure p₁).
  • Section 2 is the narrow throat (area A₂, pressure p₂).

By continuity, the same volume flows each second through both sections, so the fluid must move faster in the throat. By Bernoulli, faster flow means lower pressure there. Measure the pressure difference between 1 and 2, and you can work backwards to the flow rate.

Deriving the formula

For a horizontal venturimeter (z₁ = z₂), Bernoulli between 1 and 2 gives:

p₁/ρg + v₁²/2g = p₂/ρg + v₂²/2g

Let h = (p₁ − p₂)/ρg, the pressure difference expressed as a head of the flowing liquid:

h = (v₂² − v₁²) / 2g

Continuity: A₁v₁ = A₂v₂, so v₁ = (A₂/A₁)·v₂. Substitute and solve for v₂, then use Q = A₂v₂:

Q_theoretical = A₁ A₂ √(2gh) / √(A₁² − A₂²)

Real flow loses a little energy to friction and the flow pattern is not ideal, so we multiply by the coefficient of discharge Cd (typically 0.95–0.99):

Q_actual = Cd × A₁ A₂ √(2gh) / √(A₁² − A₂²)

Worked numerical

A horizontal venturimeter has an inlet diameter of 200 mm and a throat diameter of 100 mm. Water flows through it, and the pressure difference between inlet and throat is 20 kPa. Take Cd = 0.98 and g = 9.81 m/s². Find the discharge.

Step 1: areas.

A₁ = (π/4)(0.2)² = 0.031416 m²
A₂ = (π/4)(0.1)² = 0.007854 m²

Step 2: pressure difference to head. Water: ρ = 1000 kg/m³.

h = Δp / ρg = 20 000 / (1000 × 9.81) = 2.039 m of water

Step 3: substitute.

√(2gh) = √(2 × 9.81 × 2.039) = √40.0 = 6.325 m/s

A₁ A₂ = 0.031416 × 0.007854 = 2.4674 × 10⁻⁴

√(A₁² − A₂²) = √(9.870 × 10⁻⁴ − 6.169 × 10⁻⁵) = √(9.253 × 10⁻⁴) = 0.030419

Q = 0.98 × (2.4674 × 10⁻⁴ × 6.325) / 0.030419
  = 0.98 × (1.5606 × 10⁻³) / 0.030419
  = 0.0503 m³/s

Discharge ≈ 0.0503 m³/s, or about 50.3 litres per second.

A very common variation: a U-tube manometer

Often the pressure difference is not given directly. A differential manometer shows a mercury level difference x. Then the head difference, in terms of the flowing liquid, is:

h = x × (S_m / S_f − 1)

where S_m is the specific gravity of the manometer liquid (mercury: 13.6) and S_f that of the flowing liquid (water: 1). For x = 0.15 m of mercury with water flowing:

h = 0.15 × (13.6 − 1) = 1.89 m of water

Use that h in the same formula. Forgetting the "− 1" is the single most common error here.

Why the throat is followed by a gradual widening

The diverging section recovers most of the pressure by slowing the flow gradually. If it widened abruptly, the flow would separate and the energy would be lost as turbulence. That is why a venturimeter has a small permanent pressure loss compared with an orifice plate, and why it is preferred where energy matters.

Exam checklist

  1. State Bernoulli and the continuity equation.
  2. Convert every pressure difference to a head of the flowing liquid before substituting.
  3. Keep diameters in metres and compute areas carefully. A slip here wrecks the answer.
  4. Apply Cd at the end, and give the answer in both m³/s and L/s.

Sumantrak™ is an AI mentor built for Indian engineering, diploma, BCA and BSc CS/IT students — Fluid Mechanics, Thermodynamics, and the rest of your syllabus, explained like this. Free to start →