Laplace Transform: The Table You Need and Two Differential Equations Solved
The Laplace transform turns a differential equation into an algebra problem. Engineering Mathematics students in every branch meet it, and electrical, electronics and control students use it constantly afterwards. The method is always the same three moves: transform, solve algebraically, transform back.
The five transforms worth memorizing
| f(t) | F(s) = L{f(t)} |
|---|---|
| 1 | 1 / s |
| t | 1 / s² |
| e^(at) | 1 / (s − a) |
| sin(at) | a / (s² + a²) |
| cos(at) | s / (s² + a²) |
And the property that makes differential equations solvable, for derivatives:
L{y′} = sY(s) − y(0)
L{y″} = s²Y(s) − s·y(0) − y′(0)
The initial conditions go into the equation automatically. That is the main advantage over the classical method, where you solve first and then fit constants.
Example 1: a first-order equation
Solve y′ + 3y = e^(−2t) with y(0) = 1.
Step 1: transform both sides.
[sY − y(0)] + 3Y = 1/(s + 2)
sY − 1 + 3Y = 1/(s + 2)
Step 2: solve for Y.
(s + 3)Y = 1 + 1/(s + 2) = (s + 3)/(s + 2)
Y = 1 / (s + 2)
Step 3: transform back. From the table, 1/(s − a) with a = −2 gives:
y(t) = e^(−2t)
Check. y′ = −2e^(−2t), so y′ + 3y = −2e^(−2t) + 3e^(−2t) = e^(−2t) ✓, and y(0) = 1 ✓.
Example 2: a second-order equation with partial fractions
Solve y″ + 3y′ + 2y = 0 with y(0) = 0 and y′(0) = 1.
Step 1: transform.
[s²Y − s·0 − 1] + 3[sY − 0] + 2Y = 0
s²Y − 1 + 3sY + 2Y = 0
(s² + 3s + 2)Y = 1
Step 2: solve and factor.
Y = 1 / (s² + 3s + 2) = 1 / ((s + 1)(s + 2))
Step 3: partial fractions. Write
1 / ((s + 1)(s + 2)) = A/(s + 1) + B/(s + 2)
Multiply through: 1 = A(s + 2) + B(s + 1).
- Put s = −1: 1 = A(1), so A = 1.
- Put s = −2: 1 = B(−1), so B = −1.
So Y = 1/(s + 1) − 1/(s + 2).
Step 4: transform back.
y(t) = e^(−t) − e^(−2t)
Check. y(0) = 1 − 1 = 0 ✓. y′ = −e^(−t) + 2e^(−2t), so y′(0) = −1 + 2 = 1 ✓. And y″ + 3y′ + 2y: the terms with e^(−t) give (1 − 3 + 2) = 0, and the terms with e^(−2t) give (−4 + 6 − 2) = 0 ✓.
Where students lose marks
- Forgetting the initial conditions in the derivative formulas, or getting their signs wrong.
- Skipping the check. Substituting back takes thirty seconds and catches nearly every algebra slip.
- Partial fractions arithmetic. The "put in the root" trick (set s equal to each pole) is faster and safer than comparing coefficients.
- Not writing the table entry you used. State "using L⁻¹{1/(s − a)} = e^(at)" so the examiner can follow.
Why this matters beyond the exam
In circuits, a resistor, inductor or capacitor becomes a simple algebraic term in s, so entire circuit responses reduce to the same three moves. In control systems, a transfer function is just Y(s)/X(s). The skill you are practicing here is the foundation of that.
Sumantrak™ is an AI mentor built for Indian engineering, diploma, BCA and BSc CS/IT students — Engineering Mathematics, Circuits, Control, and the rest of your syllabus, explained like this. Free to start →